BGA Rework Station FD-5100
Model: FD-5100
FD-5100 Specifications
|
Total Power |
2100W |
|
Top heater |
Hot Air 800W |
|
Bottom heater |
IR 1200W |
|
Temperature Zones |
Two Zones |
|
Voltage |
AC220V±10%, 50/60Hz |
|
Positioning |
Outer |
|
Temperature control |
K Sensor Closed loop
heating independently |
|
Temp accuracy |
±2℃ |
|
Temperature control Settings |
8 levels of variable(up/down) and constant temperature controls
10 groups storage of temperature curves |
|
PCB size |
Max 300mm*300mm Min20mm*20mm |
|
Size of Bottom heating |
240 * 210mm heating size |
|
Cooling |
Cross-flow cooling fan to cooling the PCB |
|
Reballing |
With one 1pcs iron |
|
Minimum chip spacing |
0.15mm |
|
External Temperature Sensor |
1pcs (optional) |
|
PC Connect |
built-in VGA port to be connected to a computer |
|
Dimensions |
L470*W370*H500 mm |
|
Net weight |
14.5kg |
FD-5100 Main Functions
1. This machine uses dual temperature control with wind heating for the upper part and
IR heating for the lower part. Both parts have its individual temperature control with high
precision temperature control panel which has 8 levels of temperature adjustments and
can save up to 10 sets of temperature settings simultaneously. External temperature
sensor enables timely control, adjust and managing every temperature data.
2. It uses precise K-type close circuit control and automatic temperature adjustment system, with temperature
module to enable precision temperature control of ±2 deg C. External temperature sensor
enables temperature monitoring and accurate analysis of real time temperature profile.
3. V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds
of PCB board
4. Flexible and convenient removable fixture on the PCB board which protects and prevent damage to PCB.
It can also adapt to rework various BGA packages.
5. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement.
6. 8 segment temperature up (down) +8 segment constant temperature control
7. Before the completion of uninstalling or welding, voice reminder / warning to get the workers
prepared. After uninstalling or welding after uninstalling or welding, high capacity horizontal
airflow fan manually or automatically cools down PCB to prevent PCB deformation and
ensure quality of welding.
8. CE certification, with emergency switch and automatic power-off protection device when emergency happens.
